Yardworks 054-5745-0 Скачать руководство пользователя страница 9

Страница: 9 / 40

model no. 054-5745-0 | contact us: 1.866.523.5218

Gener

al Saf

ety Rules

KICKBACK (See Fig. 1 –

Fig. 1

ROTATIONAL

KICKBACK

Fig. 2

KICKBACK

DANGER ZONE

Kickback may occur when the nose or tip of the guide bar touches an object, or when the

wood closes in and pinches the saw chain in the cut.

Tip contact in some cases may cause a sudden reverse reaction, kicking the guide bar up

and back towards the operator.

Pinching the saw chain along the top of the guide bar may push the guide bar rapidly back

towards the operator.

Either of these reactions may cause you to lose control of the saw which could result in

serious personal injury. Do not rely exclusively upon the safety devices built into your saw. As

a chainsaw user, you should take several steps to keep your cutting jobs free from accident

or injury.

Kickback is the result of tool misuse and/or incorrect operating procedures or conditions and

can be avoided by taking proper precautions as given below:

Maintain a firm grip: thumbs and fingers encircling the chainsaw handles and both

hands on the saw. Position your body and arm allow you to resist kickback forces.

Kickback forces can be controlled by the operator if proper precautions are taken. Do not let

go of the chainsaw.

Do not overreach and do not cut above shoulder height.

This helps prevent

unintended tip contact and enables better control of the chainsaw in unexpected situations.

Only use replacement bars and chains specified by the manufacturer.

Incorrect

replacement bars and chains may cause chain breakage and/or kickback.

Follow the manufacturer’s sharpening and maintenance instructions for the saw

chain.

Decreasing the depth gauge height can lead to increased kickback.

Rotational kickback

Kickback danger zone

Содержание 054-5745-0









































Результаты поиска

Содержание 054-5745-0

Отзывы:

Похожие инструкции для 054-5745-0

Бренды по названию

Популярные бренды

Yardworks 054-5745-0, Инструкция по эксплуатации

Результаты поиска

Содержание 054-5745-0

Отзывы:

Похожие инструкции для 054-5745-0

Бренды по названию

Популярные бренды