OPERATION
1. When the log lift table attachment is flush with the beam, pull
the control lever of the control valve outward while pushing it
forward. then the wedge moves forward, and at the same time,
the log lift table attachment will go downward. When it lands,
release the control lever. (See
Figure11a
)
3. Give the control lever a backward thrust, wait until the wedge
starts to move, release the control lever, and then the log lift
table attachment starts to rise. (See
Figure 11b
)
When the wedge is extended and not fully return
back, it is prohibited to pull the control lever
outwards, otherwise the lift log attachment may
suddenly drop, causing unexpected risks such as
falling logo and so on. (See
Figure 12
)
Figure 11a
Figure 11b
Figure 12
Wedge
Log Lift Attachment
Handle Grip
Handle Grip
Wedge
Log Lift Attachment
Wedge
Log Lift Attachment
Handle Grip
Handle Grip
Wedge
Log Lift Attachment
2. Make sure wedge and log lift table stop moving, load the log
on the table.
4. Move the log from log table to the beam.
5. Push the control lever forward, the wedge will go forward to
split the log. Give the control lever a backward thrust, then
release the lever, the wedge will go back to the start position.
6. Repeat the operate from Step 1-5 to complete the log lifting
and splitting again.
9
|
Operation
