background image

SPECIFICATIONS

Model number

YM0046

Cubic Feet

1.6

Motor

120V~ 60Hz,  150W

Horsepower

.2HP

IP45 Washdown

Yes

Drum Type

Steel

Weight Capacity

100 lbs

number of blades

2

Opening Diameter

9"

Product Weight

53 lbs

SyMBOLS

The rating plate on your machine may show symbols. These represent important information about the product or instructions on its use.

Read these instructions carefully.

Wear eye protection. 

Wear hearing protection.

Wear protective gloves. 

Wear safety footwear.

Only use or operate the mixer on solid, 

flat, level ground that is capable to support 

the weight of the mixer and its load. To 
prevent the mixer from tipping over, only 

use or operate the mixer on solid, flat, level 

ground capable of supporting both the 
weight of the mixer and its contents.

Do not attempt to move the mixer 
when it is loaded and/or in operation.

Check your mixer before turning it on. 
Keep guards in place and in working 
order. 

Replace damaged, missing or failed 
parts before using it.

Keep hands out of the way of all 
moving parts.

Do not place any part of your body or 
any tool, like shovel in the drum during 
operation. 

When operating, do not pass hands 
through the clearance between frame 
and support arm or the one between 
the drum and support arm.

Do not start the motor if the drum 
is fully loaded. Do not turn mixer off 
while full of concrete.

Take left over materials to an authorized 
collection point or follow the stipulations 
in the country where the mixer is used. Do 
not discharge into drains, soil or water.

Keep children and bystanders off  
and away.

Disconnect the main plug prior to  
the repair, cleaning, and maintenance 
of  the mixer!

3

|

   Specifications & Symbols

74005US25M100.indd   3

2017/3/14   11:12:16

Содержание YM0046





















Отзывы: