The drive belt maintains a constant, even tension provided by
the spring-loaded jockey. no adjustment is needed other than an
occasional touch of grease on the spindle.
The bearings are sealed for life.
Ensure the extension cord is always unplugged before
the motor cover is removed.
Parts in a circle should only be fitted by a qualified
electrician.
The wiring diagram and parts schematic in this
manual are for reference purposes only. Neither the
manufacturer nor distributor makes any representation
or warranty of any kind to the buyer stating that he
or she is qualified to make any repairs to the product,
or that he or she is qualified to replace any parts of
the product. Only qualified technicians should repair
the mixer. Any maintenance and repairs to any of the
electric components must be performed by a qualified
electrician.
MAInTEnAnCE
REPLACING THE BELT
1. Remove the motor. (see
Figure 9a
)
2. Remove the motor cover. (see
Figure 9b, illustration 1
)
3. Turn the idle pulley and pull out the belt. (see
Figure 9b,
illustration 2
)
4. Assemble the new belt and reattach the cover and motor
assembly.
2
1
Idle Pulley
Driven Pulley
Self Tapping Screw
(×6)
Figure 9a
Figure 9b
Lock Nut M8
(×2)
M8×60
(×1)
14
Electric Concrete Mixer
»
Operator’s Manual
Maintenance
|
74005US25M100.indd 14
2017/3/14 11:12:26
