YARDMAX H200, Руководство оператора

Страница: 7 / 24

CHECK BEFORE OPERATION
For your safety, and to maximize the service life of your
equipment, it is very important to take a few moments before you
operate the engine to check its condition. Be sure to take care
of any problem you find, or have your servicing dealer correct it,
before you operate the engine.
Before beginning your preoperation checks, be sure the engine is
level and the engine switch is in the OFF position.
CHECK THE GENERAL CONDITION OF THE ENGINE
Look around and underneath the engine for signs of oil or
gasoline leaks.
Remove any excessive dirt or debris, especially around the
muffler and recoil starter.
Look for signs of damage.
Check that all shields and covers are in place, and all nuts, bolts,
and screws are tightened.
CHECK THE ENGINE
Check the engine oil level. Running the engine with a low oil level
can cause engine damage.
The Oil Alert system (applicable engine types) will automatically
stop the engine before the oil level falls below safe limits.
However, to avoid the inconvenience of an unexpected shutdown,
always check the engine oil level before startup.
Check the air filter. A dirty air filter will restrict air flow to the
carburetor, reducing engine performance.
Check the fuel level. Starting with a full tank will help to eliminate
or reduce operating interruptions for refueling.
CHECK THE EQUIPMENT POWERED BY THIS ENGINE
Review the instructions provided with the equipment powered
by this engine for any precautions and procedures that should be
followed before engine startup.
IS YOUR ENGINE READY TO GO?
Improperly maintaining this engine, or failing to
correct a problem before operation, could cause a
malfunction in which you could be seriously injured.
Always perform a preoperation inspection, and correct
any problem.
STARTING THE ENGINE
Move the fuel valve lever to the ON position.
To start a cold engine, move the choke lever to the CLOSE
position. 2.
1.
F UEL V ALV E
LEV ER
O N
OPERATION
Before operating the engine for the first time, please review the
IMPORTANT SAFETY INFORMATION and the chapter titled
BEFORE OPERATION.
Review the instructions provided with the equipment powered
by this engine for any safety precautions that should be observed
in conjunction with engine startup, shutdown, or operation.
SAFE OPERATING PRECAUTIONS
Carbon monoxide gas is toxic. Breathing it can cause
unconsciousness and even kill you.
Avoid any areas or actions that expose you to carbon
monoxide.
6
Gasoline Engine
»
Operator’s Manual
Check Before Operation & Operation
|