background image

SPECIFICATIONS

Model

H200

Type

Single cylinder, 4-Stroke, 

Forced Air Cooling, OHV

Rated power 
(HP/3600rpm)

6.5

Max. torque 

(N•m/rpm)

11/2500

Fuel consumption  

(g/kW•h)

≤395

Idle speed 

1800±150

Speed Fluctuating 
Ratio

≤10%

Transmission Mode

-

Reduction Ratio

-

Noise (≤)

-

Bore×Stroke (mm)

68×54

Displacement (cc)

196

Compression Ratio

8.5:1

Lubricating mode

Splash

Starting Mode

Recoil start

Rotation

Counter-clockwise (from 

P.T.O. side)

Valve Clearance

input valve: 0.10 mm 

~0.15mm,  output valve: 0.15 

mm ~0.20mm

Spark plug 
clearance

0.7 mm ~0.8mm

Igniting Mode

Transistorized Magneto 

Ignition

Dimension 
(Length) (mm)

315

Dimension 
(Width) (mm)

380

Dimension (High) 
(mm)

335

Net weight (kg)

16

The power rating of the engine indicated in this document is the net power output tested on a production engine for the engine model and 
measured in accordance with SAE J1349 at 3,600 rpm (Net Power) and at 2,500 rpm (Max. Net Torque). Mass production engines may vary 
from this value.

Actual power output for the engine installed in the final machine will vary depending on numerous factors, including the operating speed of 

the engine in application, environmental conditions, maintenance, and other variables.

SAFETY

IMPORTANT SAFETY INFORMATION

Most accidents with engines can be prevented if you follow all 
instructions in this manual and on the engine. Some of the most 
common hazards are discussed below, along with the best way to 
protect yourself and others.

OWNER RESPONSIBILITIES

        The engines are designed to give safe and dependable service if 

operated according to instructions. Read and understand this 
owner’s manual before operating the engine. Failure to do so 
could result in personal injury or equipment damage.

       Know how to stop the engine quickly, and understand the 

operation of all controls. Never permit anyone to operate the 
engine without proper instructions.

       Do not allow children to operate the engine. Keep children and 

pets far away from the area of operation.

REFUEL WITH CARE

Gasoline is extremely flammable, and gasoline vapor can explode. 

Refuel outdoors, in a well-ventilated area, with the engine stopped. 

Never smoke near gasoline, and keep other flames and sparks away. 

Always store gasoline in an approved container. If any fuel is spilled, 
make sure the area is dry before starting the engine.

3

|

   Specifications & Safety

Содержание H200

























Отзывы: