5
Following are some helpful tips to make the assembly process smooth and efficient.
PRE-ASSEMBLIES:
(i.e. Post and Beam Assemblies, Roof Rafter Assembly, etc)
• Work on a raised, solid and flat surface such as, a table or saw horse.
• Keep all connections flush where shown in the instructions.
• When assembling the beams keep parts flat, straight and snug when
connecting.
METAL PARTS:
• Roofing material may have sharp edges, wear safety gloves.
• Remove all plastic covering, on both sides of the metal panels, directly
before installing each piece.
• Place roofing material on a non-abrasive surface before and after assembly
as it can bend, dent and scratch easily.
• The roofing screws can easily crush the roof panels and roof edges when
using a power drill. We recommend hand tightening the roofing screws so
they sit snug and tight to the roofing material.
Assembly Tips
