Yardistry YM12904, Инструкция по установке и эксплуатации

Страница: 25 / 58

25
support@yardistrystructures.com
A: On a hard fl at surface place one Side Beam
Assembly against the outside of two Posts, fl ush
to the tops and outside corners.
The beam sits in
the notch out of the Post . Attach Beam to Posts
with three 3/8 x 9 1/2” Hex Bolt (with two 3/8” large
washers and one 3/8” lock nut) per Post. The
distance from the outside of one Post to the outside
of the second Post should be 13’ 8-1/2” (4.178 m).
(F5.1, F5.2 and F5.3)
B: Repeat with the other Side Beam Assembly
connection to Post Assembies.
Step 5: Frame Assembly and Anchoring
Part 1
Hardware
12 x 3/8 x 9-1/2” Hex Bolt (3/8” large washer x 2, 3/8” lock nut)
F5.1
F5.2
F5.3
Post Assembly is fl ush to
Side Beam Assembly
3/8” Large
Washer
3/8 x 9-1/2” Hex Bolt
3/8” Large
Washer
3/8” Lock Nut
Notice Side Beam Insert
Faces out when attaching to
Post Assemblies.
13’ 8-1/2” (4.178m)
Side Beam Assembly
Post Assembly
Note: Side Beam
Insert faces out