Page | 10
OPERATION
Warning:
If the Information in this manual is not followed exactly, a fire or
explosion may result, causing property damage, personal injury or loss of life.
OPERATING YOUR APPLIANCE
TROUBLE SHOOTING YOUR APPLIANCE
1. Push the control knob inwards and turn it counter clockwise
to the low/ignition position.
2. While continuing to depress the knob inwards, hold it at the
low/ignition position for 3-5 seconds while depressing the
igniter button with your open hand.
3. A small flame should be present, you may now manipulate
the knob to your desired flame height.
4. If a flame is not present, wait 1 minute before attempting to
light again.
- Check to see if there is a AAA battery inside of the Igniter button.
- Make sure there is no fire media inside or on top of the perforated pilot igniter protection screen
(located within the burner dish).
- Check electrical wiring connections to the sparker box and burner dish. Make sure all wires are securely
connected.
- Clear any fire media obstructing the small holes located on the burner ring.
- Check fuel line connections. Make sure all hoses are tightly secured and the manual release valve on
the propane cylinder is in it’s open position.
-Make sure the control components, burner and circulating air passageways are clean and free of foreign
substances and buildup.
P
U
S
H
Low/Ignition
position
Control Knob
Igniter Button
*If your appliance fails to produce a flame after multiple ignition attempts, follow the below trouble
shooting instructions.
*If your appliance fails to produce a flame after following the trouble shooting instructions, contact the
Yardbird Customer Experience team at: [email protected] or 877-927-2846
Warning:
Do not operate this appliance if there are any signs of damage present on
the control components and burner tray.
If any parts are damaged, refer to the replacement
part list on page 11 and call the Yardbird Customer Experience Team at 877-927-2846
