Yard force YF7302 Скачать руководство пользователя страница 28

Страница: 28 / 30

If you have any questions regarding your warranty rights and responsibilities,

you should contact Sumec hardware & Tools Co., ltd.(Sumec) customer service

representative at 866-902-9690 Monday-friday between 8:30 AM and 5:00 PM

Eastern Time or write to [email protected]

Warranty Coverage:

Sumec warrants that the product engine is free from defects in materials and

workmanship which cause such engine to fail to conform with the u.S. EPA or

State of California emissions standards for small spark-ignited nonroad (off-road)

engines – as applicable to your Sumec product. Small spark-ignited off-road

engines manufactured after January 1, 1995 and sold in the State of California

and U.S. EPA certified small spark-ignited nonroad engines manufactured in

model year 1997 or later and sold in all of the united States are covered by

this Emission Control System Warranty for a period of two years from the date

of delivery to the original purchaser. This Emission Control System Warranty

is transferable to each subsequent purchaser for the duration of the warranty

period. Emission Control System Warranty repairs or replacements will be made

without charge for diagnosis, part or labor. A list of warranted parts are warranted

only up to the first scheduled required replacement interval for such item, as set

forth in the Owner’s manual. If any emission control system part is repaired or

replaced under the Emission Control System Warranty, it shall be warranted for

the remainder of the applicable warranty period. Sumec will also repair or replace

other engine components damaged by a failure of any part covered by the

Emission Control system Warranty during the Emission Control System Warranty

Period. Only parts authorized and approved by Sumec may be used in the

performance of any Emission Control System Warranty repairs or replacements

and will be provided without charge to the owner. Unapproved, add-on, modified,

counterfeit and/or “gray market” parts may not be used to modify or repair the

Sumec engine. If such a part has been used in the repair or maintenance of your

engine, and an Sumec Authorized Service Center determines it is defective or

causes a failure of a part covered under the Emission Control System Warranty,

your claim for repair of your engine or product may be disallowed. Sumec shall

not be held liable hereunder for failures of any warranted parts caused by the use

of such an unapproved, add-on, modified, counterfeit and/or “gray market” part.

How to obtain warranty service:

you must take your power equipment engine or the product on which it is installed

, along with evidence of the date of the sale to the original purchaser, at your

expense, to any Sumec Authorized Service Center during its normal business

hours. To locate your nearest Sumec Authorized Service Center, call 866-902-

9690 Monday-friday between 8:30 AM and 5:00 PM Eastern Time or write to

[email protected]. The product owner shall be responsible for any

expenses or charges incurred for service calls or transportation of the product or

equipment engine to and from the Sumec Authorized Service Center, including

any and all damages or losses incurred during such transportation or shipment.

Содержание YF7302































Результаты поиска

Содержание YF7302

Отзывы:

Похожие инструкции для YF7302

Бренды по названию

Популярные бренды

Yard force YF7302, Руководство оператора

Результаты поиска

Содержание YF7302

Отзывы:

Похожие инструкции для YF7302

Бренды по названию

Популярные бренды