12
GETTING STARTED
1. Remove the snowblower and all other items
from the box.
2. Determine the left and right hand side of
the snowblower by standing in the normal
operating position.
3. Check all items for shipping damage. If
damage is found or suspected or if any of
the parts are missing, do not assemble.
Instead, promptly inform the dealer where
you bought the snowblower or contact at
866-902-9690 for assistance.
4. Check to make sure the upper chute crank is
included.
ASSEMBLING THE HANDLE
1. Secure the connection of the middle frame
to the lower frame by and knobs on each
and knobs on each side (Fig. 1).
2. Secure the connection of the upper frame to
the middle frame by fastening the second set
knobs and bolts on each side (Fig. 2).
4. Clip the 2 chute clean-out tool clips on the
side of the middle frame, and insert the chute
clean-out tool in the clips (Fig. 4-5).
5. Clip on the 2 cable clips on the frame, and
insert the cable inside of the cable clips (Fig.
6).
Cable clips
Cable
Chute
Clean-Out
Tool
Chute
Clean-Out
Tool Clips
Fig. 4
Fig. 6
Fig. 5
DISCHARGE CHUTE ASSEMBLY
1.
(Fig.7).
2. Lift the chute deflector and lock it securely
onto the discharge chute (Fig.8).
Fig. 7
Fig. 8
3.
desired height of the snow stream and tighten
the knob (Fig.9).
NOTE! Do not overtighten the knob.
3. To complete the handle assembly, simply
pull the middle frame back and pull the
upper frame up for easy storage (Fig. 3).
Middle Frame
Knob + Bolt
Knob + T-bolt
Lower Frame
Upper Frame
Middle Frame
Fig. 1
Fig. 2
Fig. 3
