4
PRODUCT SPECIFICATIONS
Motor
Brushless
Battery Voltage Max*
60 V D.C.
Battery Capacity
4.0 Ah
Battery Runtime Max
Working time up to 30
mins.
No-load running time
up to 45 mins.
Charger Input
100-240 V, 50/60 Hz
Charger Output
63 V D.C. 4 A
Charge Time Max
1 hour
No Load Speed
2500 RPM
Impeller Size
8 in. (20 cm)
Clearing Width
22 in. (56 cm)
Clearing Depth
10 in. (25 cm)
Discharge Distance Max 30 ft (9 m)
Plowing Capacity Max
25 Tons Per Hour
Stages
Single Stage
Type of Snow
Medium Usage
Directional Control
180
o
Adjustable Chute
LED Light
3 W
Tire size
7 in. (18 cm)
Net Weight
41 lb (18.6 kg)
GENERAL SAFETY INSTRUCTIONS
Notice the personal safety alert symbol used in
this manual to draw your attention to a WARNING
given along with the particular operating
instruction. This means that the operation
requires special ATTENTION, CAUTION, and
AWARENESS.
• Keep work area clean and well lit – Cluttered,
dark areas invite accidents.
• Keep bystanders away – All bystanders and
pets should be kept a safe distance away
from the work area.
• Dress properly – Do not wear loose clothing
or jewelry. They can get caught in moving
parts. Protective rubber gloves and non-slip
footwear are recommended when working
outdoors.
• Use the right product – Do not use this
machine for any job except that for which it is
intended.
• CAUTION! – Exercise caution to avoid
slipping or falling. Wear protective footwear
that will protect your feet and improve your
footing on slippery surfaces.
• Use safety glasses – Also use safety
gloves, hearing and head protection.
• Do not force the snow blower – Use the snow
blower at the rate for which it was designed
to ensure optimal performance and safe
operation.
• Stay alert – Watch what you are doing. Use
common sense. Do not operate the snow
blower when you are tired or under the
• Do not overreach – Keep proper footing and
balance at all times.
• Store indoors – When not in use, the snow
blower should be kept dry and stored out of
the reach of children in a high or locked place.
• Maintain snow blower with care – Follow
instructions for lubricating and changing
accessories.
WARNING:
Always disengage the switch
lever and remove the battery pack before
making any adjustments, inspecting,
servicing, changing accessories, cleaning
the snow blower, or when any other
dangerous conditions are present. Any
such operation should be performed after
revolving parts inside the snow blower
stop completely. Such preventive safety
measures reduce the risk of starting the
power tool accidentally.
WARNING:
When replacing any parts, you
must strictly observe the instructions and
procedures described in this user manual.
Special care should be paid to any rubber
parts, since these parts may increase the
motor load and decrease its mechanical
power if damaged.
WARNING:
If you notice that the snow
blower is not running properly or hear
abnormal sounds from the motor when it
is in use, immediately stop the machine,
disconnect the battery, and contact your
service centre.
• Surfaces – This snow blower is intended for
use on paved surfaces. Do not use on gravel,
stone or other unpaved surfaces. unless the
snow blower is adjusted for such surfaces
