120v
LITHIUM-ION
TM
9
condition.
2. Always allow the product to cool down before
storing.
3. When servicing the chain be aware that even
though he power source is switched off, the
chain can still move.
4. Replace worn or damaged parts for safety.
Use only genuine replacement parts and
accessories.
5.
DO NOT attempt to open the charger
and battery pack.
There are no customer
serviceable parts inside. Return to any
authorized service center.
6. Store the appliance with battery pack fully
charged at room temperature (around 68° F).
7.
Every deep discharge cycle decreases
the capacity of battery pack.
To prolong
battery life, it is recommended that you
charge the battery every six months within
extended periods of time when the product
is not in use.
Servicing
1. Have your tool repaired by an authorized
service agent. This tool is manufactured
in accordance with the relevant safety
regulations. To avoid danger, equipment
must only be repaired by qualified
technicians.
2. Only use identical replacement and
accessories made for this machine by the
manufacturer. Failure to do so can result in
personal injury.
Product safety warnings
1.
Keep all parts of the body away from
the saw chain when the chain saw is
operating. Before you start the chain
saw, make sure the saw chain is not
contacting anything.
A moment of
inattention while operating chain saws may
cause entanglement of your clothing or body
with the saw chain.
2.
Always hold the chain saw with your
right hand on the rear handle and your
left hand on the front handle.
Holding the
chain saw with a reversed hand configuration
increases the risk of personal injury and
should never be done.
3.
Hold the power tool by insulated gripping
surfaces only, because the saw chain
may contact hidden wiring.
Saw chains
contacting a "live" wire may make exposed
metal parts of the power tool "live" and could
give the operator an electric shock.
4.
Wear safety glasses and hearing
protection. Further protective equipment
for head, hands, legs and feet is
recommended.
Adequate protective clothing
will reduce personal injury by flying debris or
accidental contact with the saw chain.
5.
Do not operate a chain saw in the tree.
Operation of a chain saw while up in a tree
may result in personal injury.
6.
Always keep proper footing and operate
the chain saw only when standing on
fixed, secure and level surface.
Slippery
or unstable surfaces such as ladders may
cause a loss of balance or control of the
chain saw.
7.
When cutting a limb that is under tension
be alert for spring back.
When the tension
in the wood fibers is released the spring
loaded limb may strike the operator and/or
throw the chain saw out of control.
8.
Use extreme caution when cutting brush
and saplings.
The slender material may
catch the saw chain and be whipped toward
you or pull you off balance.
9.
Carry the chain saw by the front handle
with the chain saw switched off and away
from your body. When on transporting
or storing the chain saw always fits
the guide bar cover.
Proper handling of
the chain saw will reduce the likelihood of
accidental contact with the moving saw
chain.
10.
Follow instructions for lubricating, chain
tensioning and changing accessories.
Improperly tensioned or lubricated chain
may either break or increase the chance for
kickback.
11.
Keep handles dry, clean, and free from
oil and grease.
Greasy, oily handles are
slippery causing loss of control.
12.
Cut wood only. Do not use chain saw for
purposes not intended. For example: do
not use chain saw for cutting plastic,
masonry or non-wood building materials.
Use of the chain saw for operations different
