Yard force SA500ECO, Оригинальное руководство пользователя

Страница: 27 / 28

52 53
Short-time storage
• Store the machine in a dry place well out of reach of children.
• Do not wrap nylon sacks around the machine, as this could result in the formation of
moisture.
TROUBLESHOOTING
Troubleshooting for the charging station
LED Description
1 Blue light on Normal
2 Blue flash, Red off Charging station internal error, boundary wire OK
3 Red flash, Blue off Charging station OK; boundary wire connection is poor or broken
4 Red and Blue flash
Charging station internal error; boundary wire connection is poor
or broken
Troubleshooting for the Robomower
Nr. Message Symptom Action
1 NONE
Robomower
cannot dock with
charging station
1. Check if boundary wire under and in front of
the charger is straight line.
2. Check that the charging station's position is
suitable as explained in this manual.
2 NONE
Robomower runs in
circles while mowing or
while following boundary
wire back to charging
station.
1. Verify that no power cable runs parallel and
in close proximity the boundary wire. If
necessary, reposition the boundary wire.
2. Check if a front wheel is stuck.
3. If a neighbor has a similar Robomower, the
signals may interfere. Try setting your charging
station and Robomower to the alternative
boundary signal.
4. Driving motor may be damaged, please
contact customer support
3 NONE
The Robomower is very
noisy.
1. Inspect the blade fixing screws; tighten if
necessary.
2. Inspect the blades for damage; replace if
necessary.
3. Grass too high. Increase cutting height.
Alternatively, mow the lawn with an ordinary
lawnmower firstly, choosing a cutting height
just above the desired cutting height.
4. Cutting motor failure, please call after sales
service
4 NONE
Mower remains at or
returns to charging
station when pressing
START and closing the
lid.
1. Check if the mower already completed the
programmed working time for that day.
2. Check if the battery is very low
5
LED flash
Lift-sensor triggered
1. Too-high and dense grass (taller than 60
mm) may cause the Robomower to lift. Mow
the lawn with an ordinary lawnmower.
2. Check the mower is free from obstructions.
CLEANING/MAINTENANCE