![background image](http://html1.mh-extra.com/html/yard-force/lw-cpc1/lw-cpc1_original-instructions-manual_905875007.webp)
12
13
GENERAL SAFETY WARNINGS
PRODUCT SAFETY WARNINGS
burns or a fire.
4. Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally
occurs, flush with water. If liquid contacts eyes,
additionally seek medical help. Liquid ejected from
the battery may cause irritation or burns.
5. Do not use a battery pack or tool that is damaged or
modified. Damaged or modified batteries may exhibit
unpredictable behaviour resulting in fire, explosion or
risk of injury.
6. Do not expose a battery pack or tool to fire
or excessive temperature. Exposure to fire or
temperature above 130 °C may cause explosion.
7. Follow all charging instructions and do not charge the
battery pack or tool outside the temperature range
specified in the instructions. Charging improperly
or at temperatures outside the specified range may
damage the battery and increase the risk of fire.
service
1. Have your power tool serviced by a qualified repair
person using only identical replacement parts.
This will ensure that the safety of the power tool is
maintained.
2. Never service damaged battery packs. Service of
battery packs should only be performed by the
manufacturer or authorized service providers.
Safety instructions
1. Please observe the requirements of EN 1717 when
connecting this product to the drinking water network
and contact your sanitation specialists if you have
any queries.
2. Operate the device only with untreated, clean fresh
water. The device must not under any circumstances
be operated with explosive, corrosive or inflammable
substances.
3. The water temperature must not exceed 35°C.
4. Never fully immerse the device in liquids.
5. Only operate the device outdoors.
6. Regularly check the device for damage. Do not
operate the device if you discover visible damage.
7. Do not use the device on surfaces where water is
already present.
8. Ensure that the surface to be cleaned is free of sand,
stones or loose elements before starting work. These
can be flung away during cleaning or damage the
surface and the device.
9. Do not pull on the connected hose.
10. Only switch the device on when the brushes are on
the floor.
11. Do not lift the device off the floor when switched on.
12. All live parts in the work area must be protected
against spray water.
13. Protect the device from frost and excessive heat
(permitted ambient temperature range of 5 °C to 40
°C).
14. Do not operate the device in the vicinity of devices
that are connected to electrical power.