background image

12

13

Return to any authorised service centre.

7.  Store the appliance with battery pack fully charged at 

room temperature (around 20ºC).

8.  Every deep discharge cycle decreases the capacity 

of battery pack. To prolong battery life, it is 

recommended that you charge the battery every six 

months within extended periods of time when the 

product is not in use.

Service

Have your power tool serviced by a qualified repair 

person using only identical replacement parts. This will 

ensure that the safety of the power tool is maintained.

SAVE THESE INSTRUCTIONS!

GENERAL SAFETY WARNINGS

CHAIN SAW SAFETY WARNINGS

1. Keep all parts of the body away from the saw chain when 
the chain saw is operating. Before you start the chain saw, 
make sure the chain saw is not contacting anything.
A moment of inattention while operating chain saws may 
cause entanglement of your clothing or body with the saw 
chain.
2. Always hold the chain saw with your right hand on the rear 
handle and your left hand on the front handle. Holding the 
chain saw with a reversed hand configuration increases the
risk of personal injury and should never be done.
3. Wear safety glasses and hearing protection. Further 
protective equipment for head, hands, legs and feet is 
recommended. Adequate protective clothing will reduce 
personal injury by flying debris or accidental contact with the 
chain saw.
4. Do not operate a chain saw in a tree. Operation of a chain 
saw while up in a tree may result in personal injury.
5. Always keep proper footing and operate the chain saw only 
when standing on a fixed, secure and level surface. Slippery 
or unstable surfaces such as ladders may cause a loss of
balance or control of the chain saw.
6. When cutting a branch that is under tension be alert for 
spring back. When the tension in the wood fibres is released 
the spring loaded branch may strike the operator and/or throw 
the
chain saw out of control.
7. Use extreme caution when cutting bushes and saplings. 
The slender material may catch the chain saw and be whipped 
toward you or pull you off balance.
8. Carry the chain saw by the front handle with the chain saw 
switched off and away from your body. When transporting

PRODUCT SAFETY WARNINGS

Содержание LS G35W



















Отзывы: