background image

30

31

TROUBLESHOOTING

 

 WARNING: 

Before performing any repair work, always ensure that the battery pack 

has been removed.

 

 WARNING: 

Always wear heavy duty gloves when adjusting or cleaning, especially 

when handling sharp objects.

Fault/malfunction Cause

Remedy

Product does not
start

Battery pack not properly 
attached

Attach properly

Battery pack discharged

Remove and charge the battery
pack

Battery pack damaged

Contact our service centre

Other electrical defect to the
product

Contact our service centre

Product does not
reach full power

Battery pack capacity too low

Remove and charge the battery
pack

Air vents are blocked

Clean the air vents

Unsatisfactory result

Accessory is worn

Replace with a new one

Accessory not suitable for
intended operation

Use suitable accessory

Product suddenly
stops

Product overloaded

Remove the product from the
workpiece and switch it on again

Battery pack discharged

Remove and charge the battery
pack

Battery pack too hot

Remove the battery pack and let
it cool down

Excessive vibration
or noise

Accessory is dull / damaged

Replace with a new one

Side cover / chain loose

Adjust the chain and retighten side 
cover lock knob

CE DECLARATION

To the provisions of Council Directives

We

SUMEC UK

Unit A&B Escrick Business Park Escrick, York YO19 FD6/ United Kingdom

Declare that the product:

Machine Description: 40V Cordless Chain saw

LS G35/ M0L-SP03-40

Function: Cutting Log

Complies with the essential health and safety requirements of the following directives:

Machinery Directive 2006/42/EC 
Electromagnetic Compatibility Directive 2014/30/EC
EC Directive 2011/65/EU and its amendment Directive (EU) 2015/863 (RoHS)
Noise Emission in the Environment by Equipment for Use Outdoors Directive 
2000/14/EC amended by 2005/88/EC 
Measured Sound Power Level: 100.16 dB(A), K= 3 dB(A)
Declared Guaranteed Sound Power Level: 103 dB (A)

Standards and technical specification referred to :

EN 60745-1: 2009+A11: 2010
EN 60745-2-13: 2009+ A1: 2010
EN 62233: 2008
EN 55014-1: 2017
EN 55014-2: 2015

Authorized Signatory

Date: 

24.03.2020 

Signature:________________________

Place: York

Name: 

Mariana Hall

 

General Manager                                  

SUMEC UK

Unit A&B Escrick Business Park Escrick, York YO19 FD6

United Kingdom

Содержание LS G35W



















Отзывы: