Yard force GM B41A, Оригинальное руководство пользователя

Страница: 20 / 25

20
Mowing
WARNING! Always observe the strictest safety procedures when using this
lawnmower. Carefully read the safety instructions in this manual before use.
WARNING! Never open the safety flap when the grass bag has been detached (to
be emptied) and the engine is still running. The rotating blade can cause serious
injury!
1. Select your required setting.
2. Start the engine and allow it to run.
3. Keep a firm grip on the upper handle with engine stop/start lever and push it to start
mowing.
Good practice advice
1. Walk, never run with the mower. Be very careful when mowing uneven or rough ground.
2. Mow across slopes, never up and down.
3. Be careful when changing the direction of the mower on a slope.
4. Do not mow excessively steep slopes.
5. Best results will be achieved if the grass is dry. Wet grass will clog the blade and grass
collection system.
6. Grass grows at different rates at different times of the year. Never use the lowest cutting
height for the first cut of the season or in drought conditions.
7. Only about one third of the grass height should be cut.
8. Do not remove grass debris from the mower casing or on the blade by hand or with your
feet. Instead use suitable tools such as a brush or broom.
9. To take off the grass bag, use one hand to lift up ejector flap and the other to grab onto
the carry handle. The ejector will automatically close once grass bag is removed, this
will close off rear chute opening.
10. Empty the grass clippings from the grass bag and refit grass bag to lawnmower.
NOTE: Before taking off the grass bag, switch off the engine and wait until the blade has
come to a complete stop.
NOTE: If any grass residue is caught in the discharge chute, clean it using a brush. Do not
remove grass debris in the mower casing or on the blade by hand or with your feet. Instead
use suitable tools such as a brush or broom. To ensure that the cut grass can be collected
into grass bag, the discharge opening and inside the mower casing must be cleared of any
blockages.
OPERATION