background image

18

Checking the engine oil level and filling with engine oil.

CAUTION! 

The following procedures and adjustments must be performed before 

the engine is started. Do not attempt to make any of these adjustments while the 
engine is running. 

CAUTION! 

To prevent engine damage the engine is shipped without oil or petrol. 

The engine must be filled with the correct grade of oil and petrol before starting the 
engine. 

NOTE! 

Running the engine with a low oil level will result in engine damage. Premium 

quality 4-stroke engine oil should be used with this machine. Using non-engine oil 
can shorten the engine’s service life and using 2-stroke oil will damage the engine. 

CAUTION! 

Always use high quality engine oil (classified SAE30 oil or equivalent e.g 

SAE 10W/30, often termed as 4 Stroke lawnmower oil). Never use additives with 
recommended oil. To prolong the life of your engine it is important that the oil is 
changed after the first 5 hours of use. 

NOTE! 

To check the engine oil level, stop engine and place the mower on a level 

surface.

1.  Remove the oil filler dipstick and wipe oil from it with a clean cloth. 
2.  Insert dipstick into the oil filler neck and tighten the cap. 
3.  Remove the dipstick and check the oil level. The oil level must be between the min. 

and max. marks on the dipstick. If near the lower level, fill to upper lever with the 
recommended oil. Do not overfill. Wipe away any spilt oil. (Fig. I)

4.  Align the ribs of the cap with the groove of the filler neck. Then rotate 1/4 turn to secure 

it. 

Filling engine with engine fuel (Fig. J)

CAUTION! 

Always use clean, fresh unleaded petrol. Purchase fuel in quantities that 

can be used within 30 days. Never mix oil with petrol. 

CAUTION! 

 Do not overfill the fuel tank. 

WARNING! 

Petrol is highly flammable and extreme precaution must be taken when 

handling or working with it. Keep out of reach of children. 

WARNING! 

Refuel in a well-ventilated area with the engine stopped. Do not smoke 

or allow flame or sparks in the area where the engine is refueled or where petrol is 
stored. Avoid repeated or prolonged contact with skin or inhalation of vapour.

OPERATION

Содержание GM B41A


























Отзывы: