Yard force GDHT3620B, Оригинальная инструкция

Страница: 26 / 29

48 49
TECHNICAL DATA
Article No. GDHT3620B
Voltage 40V
Blade length 580 mm
Cutting length 550 mm
Max. cutting capacity 20 mm
No-load speed 1600 min -1
Net weight(without battery) 2.7 kg
Measured sound pressure level (L
pA
) 83.6 dB(A), k=3 dB(A)
Measured sound power level (L
WA
) 91.78 dB(A), k=1.28 dB(A)
Certified sound power level (L
WA
) 94 dB(A)
Vibrations 3.476 m/s
2
k=1.5m/s
2
Battery pack Model GY2201
Battery capacity 2,0 Ah
Battery charging time Max. 60 min
Battery charger Model GY2211
Input 220-240 V ~ 50/60 Hz
Output 40V , 3,0 A
Protection class II
The sound values have been determined according to noise test code given in EN 60745-2-
15, using the basic standards EN ISO 11094 and EN ISO 3744.
The noise figures quoted are emission levels and are not necessarily safe working levels.
Factors that influence the actual level of exposure of work-force include the characteristics
of the work room, the other sources of noise, etc. i.e. the number of machines and other
adjacent processes, and the length of time for which an operator is exposed to the noise.
Also the permissible exposure level can vary from country. This information, however, will
enable the user of the machine to make a better evaluation of the hazard and risk.
The sound intensity level for the operator may exceed 80 dB(A) and ear protection measures
are necessary.
The declared vibration value has been measured in accordance with a standard test method
(according to EN 60745-1) and may be used for comparing one product with another. The
declared vibration value may also be used in a preliminary assessment of exposure.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.
WARNING: Depending on the actual use of the product the vibration values can
differ from the declared total! Adopt proper measures to protect yourself against
vibration exposures! Take the whole work process including times the product is
running under no load or switched off into consideration!
Proper measures include among others regular maintenance and care of the
product and cutting attachments, keeping hands warm, periodical breaks and
proper planning of work processes!
DESCRIPTION OF PRODUCT
Parts description (Fig. A)
1. Blade
2. Safety guard
3. Auxiliary handle
4. Angle adjustment button
5. Main handle
6. Battery pack
7. Switch trigger
8. Safety button
Check the delivery parts (Fig. B)
Remove the machine from its packaging carefully and make sure that all of the following parts
are present:
a. Hedge Trimmer
b. Protection sleeve
c. Battery
d. Charger
e. Manual
WARNING: If any parts are damaged or missing, do not operate this tool until
these parts have been replaced. Failure to heed this warning could result in serious
personal injury.
NOTE: Always recycle the packaging in accordance with local recycling guidelines.