24
25
MAINTENANCE AND STORAGE
Overview of cleaning
1. Clean the machine. Wipe the unit with a slightly damp cloth. Do not clean the machine
using a high-pressure water jet.
2. Clean the high-pressure nozzle with needle. (Fig. O)
The pressure washer is equipped with a water filter to protect the pump. If the filter is not kept
clean, the water flow to the machine will be restricted and the pump may be damaged.
1. To clean water filter, remove transfer adapter and take out filter.
2. Rinse filter until it is free of debris and blockages.
3. Replace the filter and inlet adapter.
Maintenance
This machine is maintenance-free.
Storing
Store the machine in a dry and well ventilated area.
When the machine is not going to be used for an extended period of time, ensure to remove
the cleaning agent and drain all remaining water from the hose.
Transport
If shipping, use the original packaging wherever possible.
Disposing of the machine
This machine must not be disposed of in household rubbish. You must dispose of such old
electrical and electronic appliances separately.
Please check with your local authority how to correctly dispose of your old machine.
Disposing of the packaging
The packaging consists of cardboard and correspondingly marked sheets that should be
recycled. Ensure to recycle this packaging in line with local recycling guidelines.
TROUBLESHOOTING
WARNING:
Before performing any repair work, always ensure that the mains power
cable has been unplugged.
WARNING:
Always wear heavy duty gloves when adjusting or cleaning, especially
when handling sharp objects.
Symptom
Cause
Solution
Motor does
not run when
“ON” ( I ), fully
connected
and trigger
depressed.
ON/OFF switch is in the “OFF”
(O) position.
Turn switch to the “ON” (I) position.
Power cord is not plugged in.
Plug in power cord.
Electrical outlet does not
supply adequate power.
Try a different outlet.
Tripped pressure washer
thermal protector.
Allow to cool and restart unit.
Unit does not
reach high
pressure.
Water supply is restricted.
Check garden hose for kinks, leaks and
blockage.
Not enough water supply.
Open water source fully.
Water inlet filter is clogged.
Remove filter and rinse in warm water.
Nozzle is in low pressure
Adjust the nozzle to high pressure position.
Pump is sucking air.
Check that hoses and fittings are airtight.
Turn OFF machine and purge pump by
squeezing trigger gun until a steady flow of
water emerges through the nozzle.
Not enough inlet water supply.
Turn water on fully. Check garden hose for
kinks, leaks or blockage.
Output
pressure varies
ON/OFF switch
is in the “OFF”
(O) position.
Pump is sucking air.
Check that hoses and fittings are airtight.
Turn OFF machine and purge pump by
squeezing trigger gun until a steady flow of
water emerges through the nozzle
Water inlet filter is clogged.
Remove filter and rinse with warm water.
Discharge nozzle is obstructed.
Blow out or remove debris with a fine
needle.
Calcified gun, hose or power
nozzle.
Run distilled vinegar through detergent
tank.
Содержание EW U13
Страница 3: ...4 5 C D G H I J E F K L O M N ...
