22
23
OPERATION
WARNING:
Wear suitable clothing, ear and eye protection when working with the
equipment. Ensure that the equipment is functional before each use. Ensure that the
mains voltage value matches the label on the equipment. Check the condition of the
machine:
– Check machine for visual defects.
– Check that all parts of the machine have been securely fitted.
– Check that the water connector and the high-pressure hose are tight.
Starting and stopping
NOTE:
Put the high pressure washer on an area of flat ground. Stand in a secure
and stable position.
Starting:
1. Open the water inlet valve.
2. To switch the machine on, set the ON/OFF switch to ON. (Fig. K)
3. Unlock the safety trigger on the spray gun and press the trigger until there is a steady
stream of water. (Fig. L)
Stopping:
1. Release the trigger. Lock the safety trigger on the spray gun.
2. To switch the machine off, set the ON/OFF switch to OFF.
3. Close the water inlet valve.
CAUTION: Risk of machine damage!
Never operate the machine without water inlet as dry running may damage the
pump. Use a water filter if the inlet water is contaminated.
Working with the electric high pressure washer
Risk of fatal injury!
Use special care when cleaning tyres. Vehicle tyres/tyre valves may become damaged or
burst when handled improperly. The first sign of damage is discolouration. Damaged vehicle
tyres/tyre valves pose a life-threatening risk. Keep the jet at a distance of at least 30 cm!
Risk of fatal injury!
The high-pressure jet may be dangerous when handled improperly. The jet must not be
directed towards living beings (persons, animals), live equipment or the machine itself.
Application
High pressure working. (Fig. M)
WARNING:
Be prepared for the recoil force of the emitted water jet! Ensure that you
are standing firmly and that you are holding the gun securely, otherwise you could
injure yourself or other people.
Hold the hand-held spray gun and the jet tube firmly with both hands. Unlock the safety
button and press the trigger on the handheld spray gun.
The high-pressure pump starts running as soon as you operate the hand-held spray gun.
The high-pressure pump stops running as soon as you release the trigger on the hand-held
spray gun.
CAUTION:
Jet spray adjustment is very aggressive. Do not adjust while spraying.
If there is still air in the equipment, please proceed as follows:
Bleed the supply hose:
1. Remove the quick connection for the garden hose adapter on the water connection and
open the water tap until water with no bubbles emerges.
2. Close the water tap.
3. Connect the supply hose to the equipment with the aid of the quick connection for the
garden hose adapter
4. Fully open the water tap.
Bleed the equipment:
5. Switch on the equipment at the on/off switch until the pressure has built up.
6. Switch off the equipment at the on/off switch.
7. Depress the start lever on the spray gun until the pressure is released.
8. Please repeat steps 5-7 several times until there is no further air in the equipment.
Using the detergent bottle. (Fig. N)
1. Stop the machine.
2. Add detergent to the bottle.
Use the Turbo nozzle
The rotary lance can protect painted wood and UPVC surfaces as the water continuously
rotates resulting in a lower impact on the surface. It can be used to remove particularly
stubborn dirt.
OPERATION
Содержание EW U13
Страница 3: ...4 5 C D G H I J E F K L O M N ...
