25
7-2. Replacing gearbox oil
Check oil level as the rotary is lowered on a flat and
level place.
<Oil level check>
Check the oil level with the dipstick [1].
Remove the dipstick [1] and wipe off oil. Insert the
dipstick without tightening and pull it out. See the
oil on the dipstick between upper limit (a) and lower
limit (b). If no oil, add. If more than the upper limit,
drain.
[1] Dipstick [A] gearbox
[1] Dipstick (a) Upper limit (b) Lower limit
<Oil replacing>
Remove the drain plug [2] to drain the oil. Remove
the dipstick and pour new oil of specified amount.
Oil type: Gear oil SAE #90
Amount: 1.7 Liter
Replace: Every 300 hours.
[2] Drain plug
7-3. Replacing chain case oil
<Oil level check>
Remove the oil level plug and check oil amount. If
the oil amount is adequate, oil will come out a little.
If more than the specified amount, much oil comes
out. If oil is less than the specified amount, no oil
comes out.
<Oil replacing>
Remove the drain plug [2] to drain oil. Pour new oil
of specified amount to supply port [1].
Oil type: Gear oil SAE #90
Amount: 1.1 Liter
Replace: Every 300 hours
[A] Chain case
[1] Supply port
[2] Drain plug
[3] Oil level plug
https://tractormanualz.com/
