© 2006 Teleflex Marine, Inc.
Page 5
Mounting Instructions
Mounting the Control Head
Determine a Proper Mounting Location
The CH1900 control heads are designed to be mounted on flat vertical surfaces on port and starboard sides of
the operator helm. The controls are designed to mount on surfaces from ¾ inch (19 mm) to 1-1/4 inch (32 mm)
thick.
Since each control head is secured from the inside of the mounting surface, placement must allow clearance for
the 5 inch (127 mm) diameter mounting flange, and access behind the mounting surface for attaching mounting
hardware, making harness connections, and providing access to drag and detent adjustments.
Placement of the control heads must allow for the full range of lever movement (156 degrees) without clearance
problems. Be certain that control levers can be operated through their entire range without risk of hand or finger
injury. See Fig. 1 for outline dimensions.
Figure 1: Outline Dimensions
Outline Dimensions
