Yanmar CANplus 600, Операция и устранение неисправностей

Страница: 1 / 40

Yanmar ® 600 Control Panel
Operation and Troubleshooting
463-3000-09 Initial - 16-May-2008 1
CANplus and CANplus logo are registered trademarks of LOFA Industries, Inc.
CP600 is a trademarks of LOFA Industries, Inc.
Introduction
The Yanmar CANplus
®
600 (CP600 ™ ) control panel is an
economical platform to monitor and control electronically
governed diesel engines. Graphical gauge pages or a single
large analog gauge are displayed on the 4.25” diagonal
LCD. Virtually any SAE J1939 parameter reported by the
ECU (Engine Control Unit) can be displayed including RPM,
coolant temperature, oil pressure, engine hours, voltage and
diagnostic codes. The trans-reflective, backlit display is
clearly readable in both bright sunlight as well as total
darkness and is housed in a rugged IP67 rated housing.
Current alarm conditions are displayed in plain language on
popup messages and can be viewed in the alarm list.
Various diagnostic screens allow detailed investigation of the
CANbus data stream. By accessing the
Configuration Menu ,
users can customize displayed data to show metric or US
units, display language and various other parameters such
as the full-scale reading of gauges.
Five buttons access a context dependent button bar when
any button from 1 to 4 is pressed. The graphical menu
structure uses easily understood icons to indicate the
button’s current function. After 5 seconds of inactivity the
button bar disappears.
Button 1
Button 2 Button 3 Button 4 Button 5
Analog Gauge
Pages
Repeated presses
cycle through four
pages of analog
gauges (16 total).
Digital Gauge
Pages
Repeated presses
cycle through four
pages of digital
gauges (16 total).
Single Analog
Gauge
Repeated presses
cycle through
available analog
gauges.
Active Alarm
Page
Displays active
alarms including a
plain language
description.
Gauge
Adjust
Configures the
parameters
displayed by gauge
pages.