Yanmar 6CXM-GTE, Руководство по обслуживанию

Страница: 95 / 132

- 3-43-7 -
28) Install the fuel feed pump to the pump housing.
29) Remove the rack set bolt and install the rack setting
screw securely.
30) Hook a spring scale to the control rack and measure
the sliding force.
Excessive sliding force may be caused by the followings.
࡮
Large resistance at the sliding section of the plunger
assembly.
࡮
Excessive tightening of the delivery valve holder (distor-
tion of the plunger barrel)
࡮
Damage or particles at the tooth of the control rack or pin-
ion.
࡮
Damage at the outer periphery of the control rack.
࡮
Damage at the control rack hole in the pump housing.
In each case, disassemble and repair.
31) Assemble the governor.
32) Fill the pump and governor with clean lube oil.
Sliding force 1472 (150 gf) max.
Oil capacity
pump 250 cc
governor 300 cc