Yanmar 6CXM-GTE, Руководство по обслуживанию

Страница: 94 / 132

- 3-43-6 -
23) Align the groove of the spring shoe with the setting
bolt and carefully insert the plunger barrel assembly
in the pump housing bore.
24) Install the original shims as marked during disassem-
bly between the barrel and pump housing.
25) Install the delivery valve seat, valve, spring, stopper
and O-ring, then finger tighten the delivery valve
holder.
26) Align the marks on the barrel support and the pump
housing, then tighten the nuts to the specified torque.
27) Tighten the delivery valve holders to the specified
torque.
Note:
Apply clean lube oil to the O-rings and pump
housing bore in order not to damage the O-ring.
Do not try to drive in the barrel.
Before inserting the plunger barrel assembly,
turn the camshaft and set the cam to the position
that the tappet comes to the lowest position.
Torque
39 㨪 49 N ࡮ m (4 㨪 5 kgf ࡮ m)
Torque
98
㨪
118 N
࡮
m (10
㨪
12 kgf
࡮
m)