Yanmar 3TNV86C Скачать руководство пользователя страница 99

Страница: 99 / 99

Warranty - 98

SK1550 Operator’s Manual

Resources

Warranty

Ditch Witch

Equipment and Replacement Parts

Limited Warranty Policy

Subject to the limitation and exclusions herein, free replacement parts will be provided at any authorized Ditch Witch dealership

for any Ditch Witch equipment or parts manufactured by the Ditch Witch factory that fail due to a defect in material or

workmanship within one (1) year of first commercial use. Free labor will be provided at any authorized Ditch Witch dealership for

installation of parts under this warranty during the first year following “initial commercial” use of the serial-numbered Ditch

Witch equipment on which it is installed. The customer is responsible for transporting their equipment to an authorized Ditch

Witch dealership for all warranty work.

Exclusions from Product Warranty

•

All incidental or consequential damages.

•

All defects, damages, or injuries caused by misuse (including, but not limited to, rollover), abuse, improper installation,

alteration, neglect, or uses other than those for which products were intended.

•

All defects, damages, or injuries caused by improper training, operation, or servicing of products in a manner inconsistent

with manufacturer’s recommendations.

•

All engines and engine accessories (these are covered by original manufacturer’s warranty).

•

Tires, belts, and other parts which may be subject to another manufacturer’s warranty (such warranty will be available to

purchaser).

•

ALL IMPLIED WARRANTIES NOT EXPRESSLY STATED HEREIN, INCLUDING ANY WARRANTY OF FITNESS FOR A PARTICULAR

PURPOSE AND MERCHANTABILITY.

IF THE PRODUCTS ARE PURCHASED FOR COMMERCIAL PURPOSES, AS DEFINED BY THE UNIFORM COMMERCIAL CODE, THEN

THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE FACE HEREOF AND THERE ARE NO IMPLIED WARRANTIES OF ANY

KIND WHICH EXTEND TO A COMMERCIAL BUYER. ALL OTHER PROVISIONS OF THIS LIMITED WARRANTY APPLY INCLUDING THE

DUTIES IMPOSED.

Ditch Witch products have been tested to deliver acceptable performance in most conditions. This does not imply they will

deliver acceptable performance in all conditions. Therefore, to assure suitability, products should be operated under anticipated

working conditions prior to purchase.

Defects will be determined by an inspection within thirty (30) days of the date of failure of the product or part by Ditch Witch

Product Support (DWPS) or its authorized dealer. DWPS will provide the location of its inspection facilities or its nearest

authorized dealer upon inquiry. DWPS reserves the right to supply remanufactured replacements parts under this warranty as it

deems appropriate.

Extended warranties are available upon request from your local Ditch Witch dealer or the Ditch Witch factory.

Some states do not allow exclusion or limitation of incidental or consequential damages, so above limitation of exclusion may not

apply. Further, some states do not allow exclusion of or limitation of how long an implied warranty lasts, so the above limitation

may not apply. This limited warranty gives product owner specific legal rights and the product owner may also have other rights

which vary from state to state.

For information regarding this limited warranty, contact the DWPS department, P.O. Box 66, Perry, OK 73077-0066, or contact

your local dealer.

First version: 1/91; Latest version: 7/19

Содержание 3TNV86C




































































































Результаты поиска

Содержание 3TNV86C

Отзывы:

Похожие инструкции для 3TNV86C

Бренды по названию

Популярные бренды

Yanmar 3TNV86C, Руководство оператора

Результаты поиска

Содержание 3TNV86C

Отзывы:

Похожие инструкции для 3TNV86C

Бренды по названию

Популярные бренды