Yanmar 3TNV82A-B, Руководство по обслуживанию

Страница: 380 / 394

ELECTRONIC CONTROL SYSTEM
13-4
TNV DI Service Manual
Before You Begin Servicing
CAUTION
Do not energize the starter for a period
of longer than 15 seconds.
Take a pause of at least 30 seconds
between energization of the starter.
Otherwise the starter could suffer
damage.
9999998en
CAUTION
• High-pressure washing not
recommended.
• Avoid using high-pressure washing for
electronic or electric devices installed
in, on or around the engine, including
the E-ECU, relays and harness
couplers.
Otherwise such devices may suffer
malfunction due to water ingress into
them.
9999997en
CAUTION
• Do not plug or unplug the E-ECU for a
period of at least 6 seconds after
power to the unit has been turned on
or off.
• Do not touch connector pins of the E-
ECU with bare hands.
Doing so may result in corrosion of the
connector pins and/or damage to the
internal circuits of the E-ECU due to
static electricity.
• Do not force a measuring probe into
the female coupler.
Doing so may cause contact failure of
the connector pins, resulting in
malfunction of the E-ECU.
• Take care to prevent water from
entering the couplers when plugging
or unplugging the connector.
Water inside the couplers may cause
corrosion, resulting in malfunction of
the E-ECU.
• Avoid plugging/unplugging the
connector more than approx. 10 times.
Frequent plugging/unplugging of the
connector may cause contact failure of
the connector pins, resulting in
malfunction of the E-ECU.
• Do not use the E-ECU that has ever
suffered drop impact.
9999996en
CAUTION
Always check the battery for proper
charge.
Otherwise the electronically controlled
engines may fail to start.
9999995en
TNV_DI_SM_A4.book 4 ページ ２００７年１２月６日 木曜日 午前９時２３分