9
YZ-X7
During the machine operation
Warning: Fire or explosion hazard. Do not pick up flammable materials or active metals.
1. Each cleaning path overlaps by 5 cm.
2 Continue the machine to damage the ground.
If water suction water, the ground has drag marks, wipe with a rag tape to remove La ban. Clean up in
advance to prevent drag marks. Do not operate the machine with slopes of more than 5% (3 °).
For safety: When using the machine, move slowly on the slope and slippery ground.
5.
If excessive foam, pour the recommended deflazer solution into the sewage tank.
NOTE: Do not let the foam into the filter to avoid damage to the vacuum motor. The foam fails the filter screen
switch.
6.
Clean the extremely dirty area with double cleaning. Remove the water pick up and wash
again after dipping the solution for 3-5 minutes.
7.
More or rotate the cleaning mat as necessary.
8.
Observe the power consumption of battery meter (refer to Battery meter).
9.
Check the remaining liquid amount through the clear water tank level gauge. Traditional ground
washing method is about 10 liters per 10 minutes;
10.
When the solution in the water tank is exhausted, empty the sewage tank and reinject into
the solution.
11.
Leave the machine, park the machine on the level ground and
remove the key.After the cleaning, conduct daily maintenance
procedures.
Battery power meter
The battery power meter displays the battery power. When the battery is full, all the indicators are on.
Out from right to left. To extend the battery life, do not allow the indicator lights to extinguish until below
the following power consumption.
Description: To extend the battery life, always charge the battery after the total machine service time exceeds 3o
minutes.
Water tank drainage
The sewage tank shall be drained and cleaned after each use. Clear water tank shall be cleaned regularly to
remove any corrosion parts. Move the machine to the drain site, turn off the power key and drain the
following discharge instructions for safety: park the machine on the horizontal level and close the machine
and remove the key before turning high or repairing the machine.
Sewage discharge tank
1.
Unscrew the sewage tank drain cover in the counter-clock direction and remove it
2.
Open the sewage tank lid and flush the water tank
3.
Remove and flush the floating filter level in the sewage tank.
Содержание YZ-X7
Страница 1: ...Final Interpretation Rights Belong To Yangzi Industry Anhui Yangzi Industrial Technology Co Ltd ...
Страница 2: ...Model Number YZ X7 YZ X7 Floor Scrubber Operating Manual ANHUI YANGZI INDUSTRIAL TECHNOLOGY CO LTD ...
Страница 3: ...1 YZ X7 ...
Страница 17: ...15 Working time h 3 4h Machine Weight kg 380kg Machine Size mm 1650 1200 1420 YZ X7 ...