YANGZI YZ-X7, Руководство по эксплуатации

Страница: 10 / 21

8
YZ-X7
Knob
4.
Connect the vacuum suction pipe to the suction pickup assembly.
5.
Check and adjust properly
Install brush and cleaning pad
Description: For the recommended brush and cleaning mat, refer to this manual or consult with your
local authorized dealer.
1.
Park the machine on the level ground and remove the key.
2.
Press on the brush lift pedal to lift off theground
3.
Place the pad on the pin seat before installing the drive disc. Hold the central lock and
secure the clean pad.
4.
Align the pin seat / brush mounting column bolt at the insert motor drive disc buckle and press
the brush disc motor switch.
5.
To remove the pin seat and the brush, step on the brush head lift pedal to lift the brush
head from the ground, and press the brush plate motor switch.
Machine Operation
For safety: Do not operate the machine until you have read and understood the operating manual.
Warning: Fire or explosion hazard. Do not operate the machine near or in flammable liquid, gas or
combustible dust.
Check before operation
Clean the dust from the ground.
Check the power scale of the battery power meter. (refer to the
battery power meter) Check the wear of the cleaning pad / brush.
Check the wear of water stripping strip and adjust the angle appropriately.
The port determines that the sewage tank is empty, and a clean
floating filter screen is installed. Check the wear of the brush skirt.
Operating the machine
1. Turn the main power key on to the (I) position.
2.
Pull the suction lift down to lower the suction assembly to the ground.
3.
Press on the brush head lift pedal to lower the brush head to the ground.
4.
Open the clear water control knob.
5.
Press the brush plate motor switch, and then press the water suction motor switch.
6.
Motor Drive Model: Adjust the speed control knob to the desired cleaning speed
Description: Cleaning speed of 45-60 m per minute is recommended.