Yamato WA Series, Инструкция по эксплуатации, Страница: 25 / 53

Direct feed operation (If equipped):
The system is equipped with a pressure switch that senses downstream water demand. When
this occurs, the system enters direct feed mode and Direct Feed will display. The inlet solenoid
and pump will come on and remain running. The system will monitor the direct feed pressure
and will enter Polishing mode when demand stops for more than one minute.
CAUTION! The direct feed outlet connection must be bled during initial rinse after
bleeding the Dual Conditioning Cartridge and Polishing Cartridge. See the Direct
Feed Connection Section.
Water can be dispensed from the main outlet port during direct feed operation. However, access
to service the consumables will be disabled during a direct feed condition. This is a safety
lockout to prevent disrupted direct feed supply.
Dispensing Operations
Manual Dispense
This system can dispense water from the main home screen or through secondary dispensing
ports.
Manual Dispense Button
Manual dispense is done by pressing the single droplet button once to initiate the start. To stop
the dispense, the button must be pressed again. Note, there is a safety “time out” function after
20 minutes of manual dispensing.
23
OPERATION PROCEDURES