Yamato WA Series, Инструкция по эксплуатации

Страница: 22 / 53

To Activate the Filter Packs for All Models:
FOR WG AND WC SERIES USING THE ULTRAFILTER, AIR MUST BE BLED AS
CONDITIONING AND POLISHING CARTRIDGES ARE INSTALLED.
• From the Home Screen, press and hold the CONDITIONING icon. Press NEXT to continue.
- Follow instructions displayed. As this is the first time initialization process, a new cartridge should
have been installed. It will not be necessary to replace the cartridge as specified in the
instructions.
-
Complete the procedure by pressing Restart to return to the Home Screen.
• From the
Home Screen, press and hold the POLISHING icon. Press NEXT to continue.
- Follow instructions displayed. As this is the first time initialization process, a new filter should
have been installed. It will not be necessary to replace the filter as specified in the instructions.
-
Complete the procedure by pressing Restart to return to the Home Screen.
• Final Filter Instructions
- Wrap 3 to 5 turns of Teflon tape on the filter threads and install into the outlet.
- Place container under final filter.
- Press the dispense button.
- Purge air by slowly turning the vent port CCW until a steady stream of water is seen.
- Press the dispense button and retighten vent port once all air is purged.
20
OPERATION PROCEDURES