11
Description and Function of Each Part
Control Panel (Keys)
No.
Name
Function
1
Water level lamp
When there is water shortage/cut off in the sterilizer, the lamp normally
blinks, with a buzzer alarm sound. When the water is added to the
"standard" water level, the water level lamp will be normally ON.
2
Sterilize temp. setting
lamp
The indicator lamp is ON when the sterilization temperature is displayed.
3
Sterilize time setting
lamp
The indicator lamp is ON when the sterilization time is displayed or
entering the countdown.
4
Digital display area
Display the parameters or temperature time.
5
Heating lamp
The indicator lamp is ON when the heater is in the working state, and
blinks during the heat preservation process.
6
Interlock lamp
Close the upper cover and rotate until the upper and lower handles are
closed, and then the indicator lamp lights up.
7
Working lamp
The indicator lamp is ON when the RUN key is pressed and the product
starts to work.
8
Increase/Decrease
keys
Press "Up" to increase the parameters to be modified, and press "Down"
to decrease the parameters to be modified.
9
Function setting key
Press the "function setting" key once to switch the running state in the
display screen to the temperature setting state, press twice to switch to
the time state, and then press again to return to the running state. Long
press the key for more than 5 secs to open the hidden setting data.
10
RUN key
After setting the required sterilization temperature and time, close the
cover, press the RUN key, and the sterilizer starts to heat up and run.
11
END lamp
The indicator lamp is ON (with buzzer sound) at the end of sterilization.
*1
12
Sterilizing lamp
The indicator lamp is ON when the sterilizer reaches the set temperature
(heat preservation).
*1
Long press the "up" or "down" key for more than 5 secs to check the real-time temperature in the
sterilization process.
2
3
4
1
5
6
7
8
9
10
11
12
