(8) Initial stirring speed: Speed control volumes numbered from 1 to 6 are provided on the main body
backside. Turn these volumes to adjust the initial stirring speed. Use a screwdriver to turn the
volume of the same number as the stirring table to be adjusted to clockwise to raise the initial speed
and counterclockwise to decrease the speed. Since these volumes are installed to the board, turn
them with care to prevent damage. This speed has already been adjusted to the standard value
before shipment, and thus need not be readjusted unless specifically necessary.
(9) When stirring is over, turn the HEAT knob to OFF, the STIR knob to OFF, and the POWER switch to
OFF.
3. After-sales Service and Guarantee
When requesting repair:
Should any abnormality be observed, stop operation
immediately and turn OFF power supply. Then,
contact the shop from which you have purchased
the product or our sales office.
(Necessary data)
●
Product type name
●
Product number
●
Year/month/day of purchase
●
Contents of fault (as detailed as possible)
When our service man visits your place, be sure to
present your guarantee card.
Guarantee card (attached separately):
●
The guarantee card is delivered from the shop
from which you have purchased the product or our
sales office. Be sure to confirm the entry of the
name of shop and the date of purchase, read the
card carefully, and keep it with care.
●
The guarantee period is one year starting on the
date of purchase. Repair will be made free of
charge according to the stipulations of the card.
●
For the repair after expiration of the repair period,
refer to the shop from which you have purchased
the product or our sales office. If the functions
can be maintained by repairing, repair will be
made with charge at request of the customer.
Minimum holding period of performance parts for repair:
The minimum holding period of performance parts
for repair of the Mug Mixer is seven years after
discontinuation of manufacturing.
Performance parts for repair means the parts
necessary to maintain the performance of the
product.
4. Specifications
Stirring table
Al-made with ceramic coating, 130 mm dia. x 6 pieces
Stirring capacity
100 – 2,000 ml x 6
Rotation speed
About 300 – 1,500 rpm with individual rotation speed control (volume with OFF
position)
Motor
Shaped pole motor x 6
Hot plate
230W x 6, with individual temperature control (volume with OFF position
Temperature control
Triac input control type
Hot plate temperature Maximum temperature at 250°C
Power supply
AC100V 50/60 Hz 15A
Overall dimensions
605W x 430D x 115H mm
Weight
About 14 kg
Accessories
Stirrer 30 mm x 6
Yamato Scientific Co., Ltd.
2-2-1 Nihonbashi Muromachi, Chuo-ku, Tokyo, 103-0022, Japan
http://www.yamato-net.co.jp
Refer to the gua-
rantee card or the
nameplate attached
to the main body.
