ER 1200K – cod. 52629
13
INSTRUCTION MANUAL ENGLISH VERSION
1.
EQUIPMENT
1 pc. Router YAMATO ER 1200K
2 pc. Handles
1 pc. Dust collector
1 pc. Trammel point
1 pc. Parallel stop
1 pc. Scale
1 pc. Spanner for clumping nut
1 pc. Collet
1 pc. Base Plate
1 pc. Instruction manual
2.
TECHINICAL DATA
Model :
ER 1200K
Code :
52629
Rated Voltage (Frequency :
230 V (50 Hz)
Protection :
Classe II
Rated Power:
1200 Watt
No load speed:
11.500÷30.000/min.
Stroke (routing depth):
45 mm.
Collet:
Ø 8 mm.
Net weight :
3,15 Kg
vibration: weighted acceleration
m/s2. K=1,5
7,08 m/s2
sound power level LpA dB (A)
K=3dB(A)
88 dB
Sound pressure level LwA dB(A)
K=3dB(A)
98 dB
Noise/Vibration Information
Measured values determined according to EN 60745.
Uncertainty K=3 dB.
Wear hearing protection!
The typically weighted acceleration is on the above table.
The vibration emission level given in this information sheet has been measured in accordance with
a standardised test given in EN 60745 and may be used to compare one tool with another. The
vibration emission level will vary because of the ways in which a power tool can be used and may
increase above the level given in this information sheet.
Note:
To be accurate, an estimation of the level of exposure to vibration experienced during a
given period of work should also take into account the times when the tool is switched off and
when it is running but not actually doing the job. This may significantly reduce the exposure level
over the total working period.
Intended Use
The machine is intended for routing grooves, edges, profiles and elongated holes as well as copy
routing in wood, plastic and light building materials, while resting firmly on the workpiece. With
reduced speed and with appropriate routing bits, non-ferrous alloys can also be machined.
When using electric tools it is imperative to take the following basic safety precautions in order to
reduce the risk of electric shock, injury and fire. Read and take note of these instructions before you
use this tool.
