Yamato DP-6900, Руководство по обслуживанию

Страница: 13 / 39

(3) System parameters
System parameter mode is used to change system parameters, which determine the instrument’s
specifications.
◊
How to set system parameters
Operation Display

When the panel shows Internal Count in test mode, press and
at the same time.
Then the span adjustment screen appears. Press and
at the same time. The panel shows the system parameter #b0 with “0”
as its setup value.

Use the following keys when you set system parameters.
: Switches to the next parameter. : Increases the parameter setting by 1
& : Return to the previous parameter. : Decreases the parameter setting by 1.

(IMPORTANT)
When you have changed a setting, be sure to press to switch to the next parameter before
turning off the power.
Unless you switch to the next parameter, any changes you made to the setting will be lost.
◊
How to set system parameters (Method 2)
Operation Display

In test mode, select [PArA], and press .
The parameter setup screen appears.

Use the following keys when you set system parameters.
: Switches between the parameter number and the setup value.
(The flashing field can be edited.)
: Increases the parameter setting by 1
: Decreases the parameter setting by 1.

(IMPORTANT)
When you have changed a setting, be sure to press or to switch to the next parameter
before turning off the power.
Unless you switch to the next parameter, any changes you made to the setting will be lost.
12