Yamato DP-6200 Скачать руководство пользователя страница 5

Страница: 5 / 26

YCO-1112-04-06

DP-6200

Technical Manual

��

��

��
��
��

��

�

�� 

��

��

��

�

��

�

FIG. 4

1) Low Battery Indicator Time to replace the batteries.

Hold Indicator The scale is in Hold mode (not legal-for-trade).

Test Mode Indicator The scale is in Test Mode.

Stable Indicator Indicates the weight indication is stabilized.

2) LCD Display Shows all scale indications and weight readings.

3) Unit Indication KG, LB, OZ and LB-OZ (not legal-for-trade).

4) Over Indicator The current weight is over the user’s maximum setpoint.

Accept Indicator The current weight is within the user’s setpoints.

Under Indicator The current weight is below the user’s minimum setpoint.

5) Mode Indicator The scale is in setup mode.

Net Indicator The scale is indicating net weight.

Gross Indicator The scale is indicating gross weight.

Center of Zero Indicator The scale is at gross zero.

6) Net/Gross Key Toggles between gross and net weight readings.

Decrease Key Decreases setpoints.

Unit Selection Key Press both keys simultaneously to toggle between kilogram and

either pound, ounce or pound-ounce units.

7) On/Zero Key Turns the power on, and zeroes the display.

Next Key Moves to the next setpoint.

8) Off Key Turns the power off.

9) Tare Key Tares off the current weight.

Increase Key Increases setpoints.

Unit Selection Key Press both keys simultaneously to toggle between kilogram and

either pound, ounce or pound-ounce units.

II Description

��

Name and Function of Parts

Содержание DP-6200



























Результаты поиска

Содержание DP-6200

Отзывы:

Yamato DP-6200, Техническое руководство, Страница: 5 / 26

Результаты поиска

Содержание DP-6200

Отзывы: