Yamato DF411, Инструкция по эксплуатации

Страница: 19 / 72

16
Identification of Parts
Control Panel
ERROR
℃
DOOR
Standby
End
Heater
Fan
Fixed temp
Auto-start
Auto-stop
Program
1 2 3 4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
POW ER
M EMU PROGRAM MODE
1
MODE key
Key to select a function from program input, edit,delete modes,hour/time setting,
change-over mode, and other functions.
2
PROGRAM key
Starting/Closing of program menus
3
MENU key
Key to select the operation mode. Each mode of fixed temprature,
auto-start,auto-stop and program operation can be selected.
4
POWER key
Key to change over the controller from the standby mode to the operation mode or
from the operation mode to the standby mode.
5
Jog Dial
Key to select menu items, compile parameters etc.
6
Main Display
It displays temperatyre measurements,set values (temperature, time, hour, etc.),
program information, error information, etc.
7
Sub Display
It displays set temperture, remaining time, current hour and execution segment
No. etc.
8 ℃
lamp It flashs when displaying temperature of the inside of tank at main display
9
ERROR lamp
It flashs when any trpuble within equiment
10
DOOR lamp
It flashs to indicate that door is being opened
11
STANDBY lamp
It flashs to indicate that the instrument is in the preoperational standby mode.
12
END lamp
Stays lit in the end of operation
13
HEAT lamp
Stays lit or blinks when heater is on
14
FAN lamp
It flashes when fan is charged with electricity.
15
FIXED-TEMP
It flashs while it is operated at fixed temperature . It blinks when operation mode is
selected.
16
AUTO-START
It flashes to indicate that auto start is carried out. It blinks when operation mode is
selected.
17
AUTO-STOP
It flashes to indicate that auto stop is carried out. It blinks when operation mode is
selected.
18
PROGRAM lamp
It flashes to indicate that program operation is carried out. It blinks when operation
mode is selected.