Yamato DC401, Инструкция по эксплуатации

Страница: 6 / 31

3
1. SAFETY PRECAUTIONS
Warnings & Cautions
WARNING!
Never operate equipment near combustible gases/fumes.
Do not install or operate DC series unit near flammable or explosive gases/fumes. Unit is NOT fire or
blast resistant. Negligent use could cause a fire/explosion. See “List of Hazardous Substances” (P.28).
Always ground equipment.
Always ground this unit properly to avoid electric shock.
DO NOT operate equipment when abnormalities are detected.
If smoke or unusual odors begin emitting from unit, or if any other abnormalities are detected, terminate
operation immediately, turn off main power switch (Earth Leakage Breaker -
“ELB”) and disconnect
power cable. Continued operation under such conditions may result in fire or electric shock.
DO NOT operate with bundled or tangled power cable.
Operating unit with the power cable bundled or otherwise tangled, may cause power cable to overheat
and/or catch fire.
DO NOT damage power cable.
Damaging the power cable by forcibly bending, pulling or twisting may cause fire or electric shock to the
operator.
DO NOT handle flammable substances without proper ventilation.
Be sure there is adequate ventilation when working with certain flammable substances (such as
ethanol, etc.), which evaporate quickly at or below room temperature, and emit flammable fumes.
Insufficient ventilation may cause a fire or explosion.
See “List of Hazardous Substances” (P.28).
DO NOT disassemble or modify equipment.
Attempting to dismantle or modify unit in any way, may cause malfunction, fire or electric shock.