YCO-1047-03-13
PPC-200(W)
Operation Manual
3
1) Place the scale in normal weighing mode.
2) Press and hold the
key and push the
key. (Yellow Cor-
ners)
3) Press the
key to select the digit you want to change. The
underscore will advance to the right.
4) Press the up and down arrows to select the desired value.
5) Repeat steps 3 and 4 until all digits are set. All values below this
setpoint will be indicated as under.
6) Press and hold the
key and push the
key (Yellow Cor-
ners). This saves the lower limit and moves to the upper limit.
7) Press the
key to select the digit you want to change.
8) Press the up and down arrows to select the desired value.
9) Repeat steps 7 and 8 until all digits are set. All values above this
setpoint will be indicated as over.
10) Press and hold the
key and push the
key (Yellow
Corners). This saves the upper limit and returns you to weighing
mode.
Note: See page 6 for optional Analog Meter operation.
III Directions for Use
III.G Setting the Over/Under Indicator
