6
AB-5963
Wiring (common instructions for 7903 series
and 7913 series)
1) Dismount the cover.
(i) Cable connection
Prepare the proper seal connector (order separately) in
advance, if required.
Screw the threaded seal connector into the main and
lead the cable through it.
(ii) Conduit connection
According to the number of cable cores, prepare a
conduit set (order separately) in advance. Fix the
conduit connector and the attachment tentatively with a
screw. Select an O-ring ideal for the cable.
Lead the cable, as shown in the following diagram.
Pull up the cable and fix the attachment to the main unit
with a screw.
Tighten the nut on the conduit at a point where the
conduit lock screw can be tightened easily.
2) Connect the wires to the terminals and close the cover.
Tighten the seal connector. (only when cable
connected)
Terminal Nos. and cable cores
Seal connector
(order separately)
Nut attached to
conduit
Attachment
Conduit connector
(nominal size: 25 mm)
Pull the cable
Tightening direction
Nut attached to conduit
Conduit connector
(nominal size: 25 mm)
Straight box connector
(nominal size: 24-25 mm)
Conduit lock
screw
Attachment
O-ring
Tighten
Allow sufficient
service clearance
～
(+)
Pt 100
1
2
3
4
5
6
7
A
B
B
24 V AC
(24 V DC)
1-5 V DC
0-10 V DC
4-20 mA
HTY7903T1P00
HTY7903T4P00
HTY7903T6P00
HTY7913T1P00
HTY7913T4P00
HTY7913T6P00
(Cable cores:7)
⊥
(–)
+
–
HY7903T1000
HY7903T4000
HY7903T6000
HY7913T1000
HY7913T4000
HY7913T6000
(Cable cores:4)
Power
supply
Dewpoint
Tempe
rature
