30 (42)
5.10.7
Docking
A storage cradle should be sufficiently steady and suitable for the boat's and engine's
dimensions. A sturdy plank (2x4"), should be placed between the "V" trestles to support the
keel and to bear most of the weight of the boat. The boat must not rest on the side
supports. The side supports should not be placed touching the bottom chine, and point loads
should be avoided. The supporting structures should be strong, particularly near the
transom, to support the added weight of the engine. Storage cradle dimensions are shown in
the picture below.
Storage cradle dimensions.
Only use reputable lifting companies or boat yards with sufficient
lifting capacity. In addition to the boat's tare weight (please refer to the technical
specification), also take into consideration accessories and other possible loads in the boat.
When the boat is being lifted, the lines must be placed under the boat and the boat must
remain horizontal during lifting.
NOTE!
The boat must not be lifted by its bollards.
DANGER!
Never stand under a boat that is suspended from a crane.
Содержание Cross 49 Bow Rider
