YAMARIN Cross 49 Bow Rider страница 28 Скачать руководство пользователя | Manualshive

Страница: 28 / 42

background image

28 (42)

NOTE!

It is the owner's / user's responsibility to make sure that the
boat's mooring and anchoring equipment is suitable for the boat's
intended use.

5.10.5

Towing

When towing another boat, use a floating line that is strong enough for the task. Begin
towing carefully, avoid jerks, and do not overload the engine.

The owner of the boat should consider the measures necessary for securing the boat

’s

towrope.

If you are towing, or if your boat has to be towed, attach the towline to the bollards as per
the following image.

Attaching the towline to the bollards.

WARNING!

When towing, the towline is under high tension. If it should break,
the end that has snapped off may lash back at fatal speed. Always
use a thick enough rope and avoid the line of the towrope.

NOTE!

When towing another boat or being towed, always drive at low
speed. If the boat has a displacement hull, never exceed hull
speed while towing (speed before boat rises to plane).

NOTE!

The towline should always be fastened so that it can be
unfastened under load.

5.10.6

Trailer transport

Weight information for trailer transport can be found in the

technical specifications

. The

trailer's keel supports should carry most of the weight of the boat. Adjust the keel supports
so that the boat cannot slide from side to side. For more information on correct support and
trailer size, please turn to your dealer.

Clean the supports of sand and dirt, so they will not scratch the bottom of the boat. Double-
check that the trailer is securely coupled to the trailer tow hitch!

«
...
26
27
28
29
30
...
»

Содержание Cross 49 Bow Rider











































Отзывы:

Нет отзывов

Похожие инструкции для Cross 49 Bow Rider

Бренд: Jeanneau Страницы: 15

Platinum Fiesta

Бренд: Aquaglide Страницы: 7

Бренд: LaserPerformance Страницы: 15

BARF BALL 2091532

Бренд: O'Brien Страницы: 14

Бренд: SeaDoo Страницы: 39

Бренд: Sea-doo Страницы: 15

Бренд: Sea Ray Boats Страницы: 26

Бренд: Sea Eagle Boats Страницы: 8

Бренд: Sea Eagle Страницы: 13

Бренд: Sea Ray Страницы: 80

Бренд: Sea-doo Страницы: 202

Бренд: Sea-doo Страницы: 314

Бренд: Quantum Sails Страницы: 11

Бренд: Ranger boats Страницы: 36

Бренд: SeaDoo Страницы: 391

SUN ODYSSEY 49 DS

Бренд: Jeanneau Страницы: 126

Бренд: Yamaha Страницы: 134

Бренд: BRIG Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды