YAMARIN 80 Day Cruiser, Руководство пользователя, Страница: 35 / 48

Yamarin 80 Day Cruiser
35 (48)
6 Servicing and maintenance
Maintain your boat and its components clean. It will make your boat more comfortable to use
and increases the real sale value of the boat.
Familiarise yourself with the service procedures shown in the engine manual (see attachment).
Carry out the service carefully, or ensure it is performed by an accredited service company
6.1 Washing and cleaning the boat
Normally it is sufficient just to wash and wax the deck and sides. A special boat cleaning
agent is most suitable for the purpose. Mildly abrasive polishes can be used to remove chafing
and embedded dirt. Fibreglass surfaces can be washed with a pressure washer.
Useful tips: When the boat has been washed using tap water, a thin chalk-like layer of lime
and minerals will remain on the boat’s surface after it has dried. The problem can be
eliminated by adding a few drops of pine oil soap into a bucket of rinsing water, which will
soften it.
Useful tips: Water and lime stains on stainless steel rails and handles disappear when you
apply some Lemon Pled furniture spray. The rails start shining just as nice as they did when
the boat left the shipyard.
Useful tips: If the boat's ropes smell bad after winter storage, immerse them for a couple of
hours into a bucket of water and add a bottle of apple vinegar and a splash of fabric
conditioner for clothes. Allow the lines to dry properly.
6.2 Care instructions for seat cushions
In order to ensure that the boat's seat cushions remain in good condition you are advised to
always use the canopy or harbour cover when raining. Although they are made of water
resistant material, their seams can let water in. It is advisable to protect the cushions by
spraying them with Sunbrella -spray. If the cushions remain damp for any length of time, they
may grow mouldy and become damaged. If the mattresses get wet, the fabric can be removed
by unzipping the mattress and it can dried, for instance, in the sun, at room temperature or in a
sauna (50
° C). The warranty does not cover cushions spoilt by rain or dampness.
NOTE! During winter storage they must be stored in a dry and well-
ventilated place.
NOTE! The wet cushions should not be placed in a storage room because
they gather mould easily.
The press studs of the seat cushions should be sprayed with a silicon spray every now and
then, otherwise they may become so tight that the fabric is torn when trying to open them.
The warranty does not cover ripped seat cushions.