Yamarin Cross 46 Side Console, Руководство пользователя

Страница: 21 / 44

21 (44)
5.8 Main power switch and fuses
Electric circuit fuses are located next to the main power switch. Do not change the circuit
breaker amperages or install any components that exceed the nominal amperage of the
circuit in the electric system.
Operation of the main power switch:
-
turn handle clockwise -> circuit engaged
-
turn handle counter-clockwise -> battery disengaged from circuit
Main switch and fuses.
F1= Navigation light fuse
F2= Chart plotter (optional accessory)
F3= 12V socket fuse
F4= Reserved for additional equipment
All fuses on the boat are automatic circuit breakers. In the event of a fault current, the circuit
breaker will trip. You can reset the circuit breaker by pushing it back in. If the circuit breaker
immediately trips again, there is a short-circuit somewhere in the electrical system or in a
component. You must leave repairing the boat’s electrical system to a professional
electrician.
NOTE! Never switch off the main power switch while the engine is
running, as this m ay cause damage to the engine’s electrical
system.
NOTE! Never install electric equipment on the boat with the power
switched on.
NOTE! When you install additional equipment in the boat, use an Extra
circuit and a separate circuit breaker (socket F4 for automatic
circuit breaker). Connect the device to both the live wire and the
ground wire.
Never use the hull of the boat as ground.
NOTE!
When connecting or disconnecting the battery, do not touch both
terminals, or a terminal and the hull of the boat simultaneously
with metal objects.