Yamaha ZUMA 125 Скачать руководство пользователя страница 55 | Manualshive

Страница: 55 / 96

Yamaha ZUMA 125 Скачать руководство пользователя страница 55

Periodic maintenance and adjustment

7-14

1

2

3

4

5

6

7

8

9

10

11

12

13

14

NOTICE

ECAT1330

Replace the air filter element outer
sponge if it is damaged or cannot be
cleaned with water.

5. Insert a new air filter element with

the sponge into the air filter case.

NOTICE:

Make sure that the air

filter element is properly seated
in the air filter case. The engine
should never be operated with-
out the air filter element in-
stalled, otherwise the piston(s)
and/or cylinder(s) may become
excessively worn.

[ECA10482]

6. Install the air filter case cover by in-

stalling the screws.

Cleaning the air filter check hose

1. Check the hose on the rear side of

the air filter case for accumulated
dirt or water.

2. If dirt or water is visible, remove

the hose, clean it, and then install
it.

Cleaning the V-belt case air filter el-
ement

1. Remove the V-belt air filter case

cover by removing the screws.

2. Remove the filter element holder

by removing the screw.

3. Pull the air filter element out, and

then clean it with solvent. After
cleaning, remove the remaining
solvent by squeezing the element.

WARNING! Use only a dedicat-
ed parts cleaning solvent. To
avoid the risk of fire or explo-
sion, do not use gasoline or sol-
vents with a low flash
point.

[EWA10431]

NOTICE:

To avoid

damaging the air filter element,
handle it gently and carefully,
and do not twist it.

[ECA10522]

1. Air filter element
2. Air filter element outer sponge

1

2

1. V-belt air filter case cover

1. V-belt case air filter element holder

1

1

BC9-9-14E0.book 14 ページ２０１９年５月８日　水曜日　午後１時２２分

«
...
53
54
55
56
57
...
»

Содержание ZUMA 125

































































































Отзывы:

Нет отзывов