Periodic maintenance and adjustment
7-9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
then wipe off any grime from the
spark plug threads.
2. Install the spark plug with the spark
plug wrench, and then tighten it to
the specified torque.
TIP
If a torque wrench is not available when
installing a spark plug, a good estimate
of the correct torque is 1/4–1/2 turn
past finger tight. However, the spark
plug should be tightened to the speci-
fied torque as soon as possible.
3. Install the spark plug cap.
4. Install the panel.
EAU82180
Canister
This model is equipped with a canister
to prevent the discharging of fuel vapor
into the atmosphere. Before operating
this vehicle, make sure to check the fol-
lowing:
each hose connection, tighten if
loose.
each hose and the canister body
for damage, replace if damaged.
the canister breather hose is not
blocked off, clean if necessary.
Tightening torque:
Spark plug:
13 N·m (1.3 kgf·m, 9.4 lb·ft)
1. Canister
2. Canister breather hose
1
2
BC9-9-14E0.book 9 ページ 2019年5月8日 水曜日 午後1時22分
Содержание ZUMA 125
Страница 92: ...BC9 9 14E0 book 3 ページ 2019年5月8日 水曜日 午後1時22分 ...
Страница 93: ...BC9 9 14E0 book 4 ページ 2019年5月8日 水曜日 午後1時22分 ...
Страница 94: ...BC9 9 14E0 book 4 ページ 2019年5月8日 水曜日 午後1時22分 ...