Maintenance
61
5.
Check that the tilt rod and trim rods are
free of corrosion or other flaws.
6.
Activate the tilt-down switch until the trim
rods have retracted completely into the
cylinders.
7.
Activate the trim-up switch until the tilt
rod is fully extended. Unlock the tilt sup-
port lever.
8.
Tilt the outboard motor down. Check
that the tilt rod and trim rods operate
smoothly.
NOTE:
Consult your Yamaha dealer if any operation
is abnormal.
EMU29171
Checking propeller
WARNING
EWM00321
You could be seriously injured if the en-
gine accidentally starts when you are
near the propeller.
●
Before inspecting, removing, or install-
ing the propeller, remove the spark
plug caps from the spark plugs. Also,
place the shift control in neutral, turn
the main switch to “
” (off) and re-
move the key, and remove the lanyard
from the engine stop switch. Turn off
the battery cut-off switch if your boat
has one.
●
Do not use your hand to hold the pro-
peller when loosening or tightening the
propeller nut. Put a wood block be-
tween the anti-cavitation plate and the
propeller to prevent the propeller from
turning.
1. Tilt support lever
ZMU04155
1
ZMU04156
ZMU03460
ZMU01896
©
2019 Yamaha Motor Corporation, U.S.A.
Содержание Z150
Страница 84: ...Consumer information 78 2 0 1 9 Y a m a h a M o t o r C o r p o r a t i o n U S A...
Страница 86: ...Consumer information 80 2 0 1 9 Y a m a h a M o t o r C o r p o r a t i o n U S A...
Страница 87: ...Consumer information 81 2 0 1 9 Y a m a h a M o t o r C o r p o r a t i o n U S A...
