Operation
41
EMU27881
Adjusting trim angle
Power trim and tilt models
WARNING
EWM00750
●
Be sure all people are clear of the out-
board motor when adjusting the tilt an-
gle, also be careful not to pinch any
body parts between the drive unit and
clamp bracket.
●
Use caution when trying a trim position
for the first time. Increase speed gradu-
ally and watch for any signs of instabil-
ity or control problems. Improper trim
angle can cause loss of control.
●
Use the power tilt switch located on the
bottom engine cowling (if equipped)
only when the boat is at a complete
stop with the engine off.
Adjust the outboard motor trim angle using
the power trim and tilt switch.
To raise the bow (trim-out), press the switch
“
” (up).
To lower the bow (trim-in), press the switch
“
” (down).
Make test runs with the trim set to different
angles to find the position that works best for
your boat and operating conditions.
NOTE:
To adjust the trim angle while the boat is
moving, use the power trim and tilt switch lo-
cated on the remote control device or tiller
handle, if equipped.
EMU27911
Adjusting boat trim
When the boat is on plane, a bow-up attitude
results in less drag, greater stability and effi-
1. Power trim and tilt switch
1. Power trim and tilt switch
1. Power trim and tilt switch
ZMU04601
DN
UP
1
UP
DN
ZMU04615
1
©
2019 Yamaha Motor Corporation, U.S.A.
Содержание Z150
Страница 84: ...Consumer information 78 2 0 1 9 Y a m a h a M o t o r C o r p o r a t i o n U S A...
Страница 86: ...Consumer information 80 2 0 1 9 Y a m a h a M o t o r C o r p o r a t i o n U S A...
Страница 87: ...Consumer information 81 2 0 1 9 Y a m a h a M o t o r C o r p o r a t i o n U S A...
